H2GO – 4 fl oz, Spray

Details

Walker Tape®’s H2GO is the most effective way to remove water-based adhesives. It is gentle on the skin while packing a powerful punch, quickly removing water-based adhesives. H2GO is the hassle-free way to remove water-based adhesives. With a light lemon fragrance and no flammable ingredients, cleanup is easy – just rinse off with soap and water. Keep the product away from heat, humidity, and light. Store in a well-ventilated, cool, dark, dry, room-temperature controlled environment (60-80°F). Close bottle lids tightly. H2GO is not flammable. With proper storage, our liquid products have a shelf life of up to six months.

Directions

Saturate the glue area with H2GO and let it sit for 5-10 seconds. As it softens, start removing the adhesive. Repeat this process as needed until the skin and unit are clean. Shake well before use. Saturating the adhesive area and wiping off the residue once breakdown has occurred will help give the best results. The release time will depend on adhesive buildup. Wipe or brush off residue. Shampoo and rinse. We recommend performing a patch test before use. To Do a Solvent Soak: Fill a large bowl or sink with C-22 Solvent. Place the system into the solvent, base side up. Keep the system submerged and work the adhesive build up off. Wear gloves to keep your hands out of direct contact with the solution. Shampoo the system and rinse. Soak times vary from 5-30 minutes, depending on the type of system and adhesive used.

Cautions

Close lid tightly. Do not apply to broken, cut, or irritated skin. External use only, do not ingest. Avoid eye contact. Keep out of reach of children. Test on a small area before use. Store in a well-ventilated, cool, dark, dry, room-temperature controlled environment (60-80°F).

SDS Sheet